BLUETTI Elite 300 Portable Power Station | 3,014.4Wh 2,400W

FAQs

• Q14: Does it support Cash on Delivery (COD)

  A:

  No, we do not support Cash on Delivery. We only accept prepaid orders.

• Q1: What can I use the Elite 300 for?

  A:

  The Elite 300 is a powerful portable power station with 3,014.4 Wh and 2,400 W of power. It's perfect for home backup, RV trips, outdoor activities, and emergencies.

• Q2:How much power does it have, and what can it run?

  A:

  ● Capacity: 3,014.4 Wh ● Rated Power: 2,400 W ● Lifting Power: 4,800 W ● It can power: Refrigerators, microwaves, coffee makers, lights, audio systems, computers, RV air conditioners, and more.

• Q3: How portable is it?

  A:

  At just 26.3 kg with a carrying handle, the Elite 300 is one of the lightest in its class. Take it from home to RV to campsite with ease.

• Q4: Can it charge and power devices at the same time?

  A:

  Yes. The Elite 300 supports pass-through charging.

• Q5:Does the Elite 300 support app control?

  A:

  Yes. Once connected to the BLUETTI app via Wi-Fi or Bluetooth, you can: Monitor and control it in real time Adjust settings Receive smart alerts Turn it on or off remotely from Sleep Mode Automate devices like lights, A/C, and heaters with custom timers More to explore

• Q6:What ports does it have?

  A:

  The Elite 300 has 11 ports: 4 × 2,400 W Max. AC 1 × NEMA TT-30 port (for direct RV hookup) 1 × 12 V/30 A DC port (for high-power RV devices like water pumps) 2 × 15 W USB-A (30 W total) 1 × 100 W USB-C 1 × 140 W USB-C 1 × Cigarette lighter port (120 W Max.)

• Q7: How can I charge it, and how long does it take?

  A:

  2,400 W AC + Solar : 80% charge in 78 minutes, full in 1.6 hours 1,800 W AC: Full charge in 2 hours 1,200W Max., 12V–60V, 22A Max. Solar: Full charge in 4.1 hours Note: Charging times may vary based on sunlight, panel angle, temperature, and other factors. Car Charging: 12 V Cigarette Lighter: 100 W, full in 30.6 hours 24 V Cigarette Lighter: 200 W, full in 15.6 hours Charger 1: 560W, full in 6.7 hours Charger 2: 1200W, full in 3.2 hours Note: Charging times may vary depending on vehicle voltage stability. For optimal performance, Charger 2 is recommended.

• Q8: How fast is the UPS switchover, and does it protect my devices?

  A:

  The Elite 300 has an ultra-fast ≤10 ms switchover, so if the power goes out, it instantly switches to battery backup. This ensures your devices keep running without interruptions, protecting things like computers and storage devices.

• Q9:How do I get the most solar input from the Elite 300 under the 60 V limit?

  A:

  The Elite 300 supports up to 1,200 W solar input (12–60 V, 22 A).  To maximize input:  • Wire panels in series to boost voltage.  • Wire panels in parallel to increase current.  • Don't mix different types of solar panels.  Recommended setups:  • PV200: 2S2P  • PV350: 2P  • SORA 500: 2P
  

• Q10: Why does the Elite 300 use an XT90 instead of XT60 on the 12 V/30 A DC port? How do I tell input vs output?

  12 V/30 A output requires higher current capacity, making XT90 a safer and more reliable option for long-term use.  • DC 12 V/30 A output: XT90 (female)  • DC input: XT60 (male)

• Q11: Can I charge the Elite 300 with a third-party 12 V/24 V/48 V lithium battery via the solar input?

  A:

  Yes. Use a clamp-to-XT60 charging cable. Ensure correct polarity when connecting the clamps to the battery. Note: Max. charging power is limited to 100 W (12 V), 200 W (24 V) or 398 W (48 V). You can purchase Charger 1/Charger 2 to boost the charging power to 560 W/1,200 W.

• Q12: Can I use the Charger 1 or Charger 2 with the Elite 300?

  A:

  Yes.  • Charger 1: Delivers up to 560 W, fully charges in about 6.7 hours.  • Charger 2: Delivers up to 1,200 W with car and solar, fully charges in about 3.2 hours

• Q13: Can I expand capacity with B300 or B500 batteries?

  A: No. The Elite 300 does not have a dedicated expansion port and cannot directly link with B80, B230, B300, B300K, or B500K batteries. However, you can charge the Elite 300 using these batteries (except B80) via Charger 2.

• Q14: What's the Elite 300's standby power and DC efficiency?

  A:

  • Standby power: 4 W with AC and DC outputs off.  • DC efficiency: 90%.

• Q15: What is the UPS switchover time of the Elite 300?

  A:

  10 ms switching for uninterrupted backup power.

• Q16: Can the Elite 300 charge and discharge at the same time?

  A:

  Yes, the Elite 300 supports pass-through charging.  AC bypass output:  • US: 1,800 W Max., 120 V, 50/60 Hz  • EU/UK/AU: 2,300 W Max., 230 V, 50/60 Hz  • JP: 1,500 W Max., 100 V, 50/60 Hz

• Q17: What can Power Lifting mode handle?

  A:

  Up to 4,800W, but only for pure resistive loads like heaters, hair dryers, electric stoves, and ovens.

• Q18:Why does the Elite 300's weight vary by region?

  A:

  Because internal components and outlet types differ by region, which affects total weight.

• Q19: Can I use all DC ports at once? Will it hit 600 W?  

  A:

  You can use them all, but the total DC output is capped at 400 W.

• Q20:Can I reverse charge the Charger 2 using the Elite 300's 12 V/30 A output port?

  A:

  No.

• Q21:Can I control the 12 V output and USB outputs separately?

  A:

  No. All DC ports share one switch.

• Q22:How long can the Elite 300 run common devices?

  A:

  Estimated runtime = Total capacity × Depth of discharge (DoD) × η (Inverter efficiency) ÷ (Load power + Elite 300's self-consumption)  For Example:  Everyday Essentials  • Light (10 W): 94.2 hours  • Router (12 W): 87.6 hours  • Mobile phone (15 Wh): 79.2 times  • Laptop (60 Wh): 32.6 times  Home Comforts   • Fan (50 W): 37.5 hours  • 50'' LED TV: 21.42 hours  • Refrigerator (150 W): 59.9 hours  • Air conditioner (740 W): 3.3 hours  Kitchen Appliances  • Microwave (1,000 W): 2.5 hours  • Coffee maker (1,100 W): 2.2 hours  Heating Appliances  • Heater (500 W): 4.8 hours  Notes: • DoD=92%, η=90%.  • The above data is tested by BLUETTI Lab. Actual results vary based on usage..

• Q23:Will the Elite 300 overheat in an RV or tight space?

  A:

  No, the Elite 300 is designed with built-in cooling fans. However, it's recommended to leave at least 2 inches (5 cm) of space behind it for proper airflow.

• Q24:Can I expand the Elite 300 besides using Charger 2?

  A:

  No. The Elite 300 is designed as a standalone unit without native expansion ports.